Carbide Tipped Wood Forstner Drill Bits

1. The material of forstner bit : Tungsten carbide YG8 tip with carbon steel 45# body2. The color: Different color painting are available.3. With Brad point , 2 main cutting edges and 2 circumferential cutting deges.4. Application: For drilling dimensionally accurate and tear-free holes in soild wood,vaneered wooden board,laminated board,chipboard and plywood,etc5. Used for : Ideal for door locks, morticing, electrical and plumbing work

1. The material of forstner bit : Tungsten carbide YG8 tip with carbon steel 45# body2. The color: Different color painting are available.3. With Brad point , 2 main cutting edges and 2 circumferential cutting deges.4. Application: For drilling dimensionally accurate and tear-free holes in soild wood,vaneered wooden board,laminated board,chipboard and plywood,etc5. Used for : Ideal for door locks, morticing, electrical and plumbing work

Carbide tipped Metal cutting hole saw1. Made of high quality solide carbide tips, reduce the damage of tips, increase the endurance.2. Assembled with high quality center drill and spring.3. Maxium cutting depth of 12mm on solid plate with pistol drills, and 1mm ~10mm on solid plate with magnetic drills.

1. Vacuum Brazed Diamond hole Saw is designed for high speed high performance and heavy duty use on Ceramic, Poecelain, granite, marble,, glass, quartz, limestone, fiberglass, terracotta, terrazzo, quarry, vitrified tiles.  2. Fast drilling, 10 seconds for one hole.3. 10 times Longer life than the electroplated tools.4. Working Speed: 6000 - 10000 RPM.5. Dry / Wet use;

The ergonomic design enable users to work long time without fatigue. Large torque ann long service life. Suitable for the production line of furnitureAnd engine repairing work.

Customized:CustomizedCertification:CeLength:Taper-lengthTypeCore Drill BitMaterial:Tungsten CarbideUsage:Wood Drilling, Ceramic drilling, ceramic tile drilling, glass drilling, Masonry Drilling

*TCT self-feed hole cutter(Fine) is specially designed for wood, especial rough wood, plain, laminated-coated chip board, plywood, paper-base laminate, PVC, glass fiber, reinforced plastic, gas concrete, stone, plaster board, clay tiles and hollow gauge

Carbide tipped Metal cutting hole saw1. Made of high quality solide carbide tips, reduce the damage of tips, increase the endurance.2. Assembled with high quality center drill and spring.3. Maxium cutting depth of 15mm on solid plate with pistol drills, and 25mm ~50mm on solid plate with magnetic drills.